Because the hydraulic cylinder to bear a lot of pressure, the heavier the load, the greater its pressure will be, so do the hydraulic cylinder maintenance work is the maintenance of the entire hydraulic system the most important part.
Hydraulic cylinder is equivalent to the heart of the hydraulic system, the heart is difficult to repair the problem, so the maintenance of hydraulic cylinders is to be careful and meticulous.
First of all, to rust. Because the piston part of the hydraulic cylinder in the working state is to extend out of the cylinder, and will naturally be the oxide, acid gas erosion, which requires us to apply it to the amount of grease to protect, so as not to load the components of the piston It may be broken at work and may be broken.
Second, to open the box for oil. Because of prolonged use, it will inevitably have foreign body into the hydraulic cylinder, so that the friction will increase in the use of the phenomenon, in addition, the hydraulic oil is also a certain life, long time without oil change will damage or erosion of hydraulic cylinders.
So that in the work of the hydraulic cylinder to control the speed of appropriate, not more than 2m / s, which can extend the service life of hydraulic cylinders, and in addition to the protection of institutions and safety reasons, the internal installation of the buffer device for the hydraulic cylinder protection is very Effective.
Hydraulic cylinder is equivalent to the heart of the hydraulic system, the heart is difficult to repair the problem, so the maintenance of hydraulic cylinders is to be careful and meticulous.
First of all, to rust. Because the piston part of the hydraulic cylinder in the working state is to extend out of the cylinder, and will naturally be the oxide, acid gas erosion, which requires us to apply it to the amount of grease to protect, so as not to load the components of the piston It may be broken at work and may be broken.
Second, to open the box for oil. Because of prolonged use, it will inevitably have foreign body into the hydraulic cylinder, so that the friction will increase in the use of the phenomenon, in addition, the hydraulic oil is also a certain life, long time without oil change will damage or erosion of hydraulic cylinders.
So that in the work of the hydraulic cylinder to control the speed of appropriate, not more than 2m / s, which can extend the service life of hydraulic cylinders, and in addition to the protection of institutions and safety reasons, the internal installation of the buffer device for the hydraulic cylinder protection is very Effective.